10% off Segreto, the "Secret" of Naples I Gold medal-winning duo with 10% off
Fast shipping with DHL
Mon-Thu: 9 am - 3 pm, Fri: 9 am - 2 pm

JoeFrex - 57 mm Tamper KNOCK-CONVEX

JoeFrex - 57 mm Tamper KNOCK-CONVEX

All bases of KNOCK-CONVEX have a convex surface for pressing the espresso

£19.90
Prices incl. VAT plus shipping costs

5-7 Workdays Article No. 9052-57-bkc

  • 9052-57-bkc
  • 4260150974750

Advantages

  • Fast shipping with DHL
  • Imported directly from Italy
  • Freshness guaranteed
JoeFrex - 57 mm Tamper  KNOCK-CONVEX All KNOCK CONVEX bottom parts have a slightly convex... more

JoeFrex - 57 mm Tamper  KNOCK-CONVEX

All KNOCK CONVEX bottom parts have a slightly convex pressing surface to compress the coffee grounds.

Why the name Knock?

After pressing the coffee grounds for the first time, lightly tapping on the side of the filter holder to dislodge any remaining grounds. Subsequently, it can be pressed again. To avoid using the base of the tamper or the wooden handle for this light tap on the filter holder, risking damage to both the tamper and the filter holder arm, you can now tap with the integrated silicone ring in the base.

Why the name CONVEX?

Normally, the surface of the coffee grounds pressed into the filter holder doesn't play a significant role; whether it's flat or concave, there's enough space between the coffee surface and the dispensing group so that the water can be evenly distributed over the coffee grounds and pass through them evenly. However, if a flat filter is used in the arm, or if much more than 7g (for a one-cup filter) or 14g (for a two-cup filter) is used, the space between the coffee grounds and the dispensing group may be too small for optimal water distribution. For this purpose, the Convex Tamper Base can be used, as it leaves a cavity in the middle of the pressed coffee, for better water distribution.

The dimensions of the tamper to be used vary depending on the manufacturer. Below is a list of manufacturers and their required dimensions for tampers:

- Delonghi BAR Tamper: 51mm
- Dalla Corte Tamper: 54mm
- ECM Tamper: 58mm
- Elektra Micro Casa S1 Tamper: 49mm
- Elektra Tamper: 58mm
- Faema Tamper: 58mm
- Fiorenzato Tamper: 58mm
- Francis! Francis! X1 Tamper: 56mm
- Gaggia Tamper: 58mm
- Grimac Tamper: 58mm
- Isomac Tamper: 58mm
- IZZO Lever Tamper: 53mm
- IZZO Tamper: 58mm
- Krups Tamper: 48/49mm
- La Cimbali Tamper: 58mm
- La Marzocco Tamper: 58mm
- La Pavoni Club Combo / Duetto Tamper: 58mm
- La Pavoni Europiccola Tamper: 48/49mm
- La Pavoni Manual Lever for Domestic Use (from 1999 onwards) Tamper: 51mm
- La Pavoni Manual Lever for Domestic Use (up to 1999) Tamper: 48/49mm
- La Pavoni Lusso Tamper: 53mm
- La Pavoni Millennium Tamper: 51mm
- La Pavoni Professional Tamper: 51mm
- La Pavoni Pub Tamper: 58mm
- La Scala Tamper: 58mm
- La Spaziale Tamper: 53mm
- Nuova Simonelli Tamper: 58mm
- Quickmill: 58mm
- Rancilio Tamper: 58mm
- Reneka Tamper: 57mm
- Saeco Tamper: 53mm or 51mm
- San Marco Tamper: 54.4mm or 53mm
- Vibiemme Tamper: 58mm
- Wega Tamper: 58mm



EAN: 4260150974750
espresso-international.co.uk Reviews with ekomi.co.uk
Manufacturer:

JoeFrex GmbH, Dientzenhoferstr. 72, 90480 Nürnberg, Germany